سيمنز 6DD2920-0AV3 وحدة

siemens Simadyn Prozessor module 6DD2920-0AV3

introduction

Since replacing the PLC cpu also requires changing the PLC entire back plane, any modules that were previously used in the S5 rack must also be replaced. This includes all I/O modules, function modules, and communication modules. c. interface modules in local expansion racks in legacy S5 applications, there may have been more than one tier of modules (local expansion racks) connected to the main rack. in these cases, all the modules will have to be replaced with S7 modules. If using the S7-300 family, a similar architecture can be achieved using the IM360, IM361, and IM365 modules to expand the main rack. If using the S7-400 family, the IM460 and IM461 are used. another possible thing to consider is to move the modules to a remote rack and use the IM463 interface as shown below. This might be cost effective since you could reuse the S5 I/O modules. The following sketch shows remote racks of S5 type connected to a S7 main rack through the IM463. note this could be a possible setup for both intermediate performance and high performance systems. The IM463 interface is very easy to program. very similar to a dp coupler in that it has S5 addresses assigned on one side and S7 addresses assigned on the other side. experience has proven that the correct length of the 721 cable is important. there is a switch on the front of the IM463 module which must be set to the length of the 721 cable. there are 4 choices for length. Again, the other way to migrate the system would be to convert the remote racks and all of the modules to ET200M. it may be wise to make several estimates of hardware conversions, and choose the most cost effective approach.

siemens main Serise:

other Proucts

service

Warranty: 12 months.

lead time: 1-3 working days.

type of payment:T/T and western Union.

courier partners: DHL, UPS, TNT, FedEx

technical specification, manuals and data sheets: available on request.

about us

high five PLC parts limited for many years, is a professional engaged in large-scale system (distributed control system, programmable controller, redundant fault-tolerant control systems, robot control system, large servo control system is the central feeding system plastic molding auxiliary equipment and automation of whole plant planning) imported automation system such as spare parts, modules, sales and system integration of high-tech enterprises. The company is equipped with professional technicians to provide customers with better service.